Recently Purchased Process Equipment and Packaging Machinery

Stock# 52952001

Unused- Steris (Amsco) Century Series Single Door Sterilizer, 15 GPM. Chamber size: 34" wide x 52" tall x 66" deep with Prevac. Chamber and Jacket rated 45psi at -20 to 300 degrees F. Driven by a 2hp 3/60/208-240/460v, 3450rpm motor, through a reducer. Has Allen Bradley Logic 53 PLC controls with Allen Bradley Panelview 600 HMI. Never installed in production. Mounted on a carbon steel frame with casters. Serial# 0803056, National Board# 87274

Stock# 52954001

Used-Set of (2) Guoxin Automatic Continuous Hemp Dryers; Model GX12; Converyors: Model B-180, 3kw, food grade stainless or pvc ; Control Cabinet: Model XL-21 ; Heat Exchange System: Hot Air Draft Fan: GY4-73-12C-22kw, Smoke Exhaust Fan: Y5-47-4C-2.2kw.

Stock# 13705072

Used- Samtech 4.5 Sq. Ft Wiped Film Evaporator Extraction Plant; Model Dig-Maz-10 ExKA; Sanitary Stainless Steel Construction, Skid Mounted to include, 4.5 sq Ft Wiped Film Evaporator, 10 Liter Self Cleaning Extractor/Percolator, Scraper Agitated Product Feed Tank, Condensor, Solvent recovery system, capable of doing liquid/solid and liquid liquid extraction, rated 8 Bar (115 PSI) int @ up to 120 C (248 F), rated app.. 4 liter per min depending product characteristics.

Stock# 52973001

Used- GEA Westfalia Profi 400/GSE 400 Desludger Disc Centrifuge. 316 Stainless steel construction (product contact areas). Clarifier design (liquid/solids separation), centripetal pump liquid discharge. Hydro stop system, Belt driven by a 90kw (130 HP), 380-400-420volt/50-60cycle/3Ph drive motor. Includes: Surge tank, Sludge pump, control panel. Previously used in a brewery application. New 2008.

Stock# 52955001

Unused - Vapor Recovery Tower; 36" OD x 40'-0", Stainless Steel. Rated 75 psig at -20 to 450 F. ASME Section VIII, Division 1, 42 Bbl Capacity. Serial# 3156-1, built 2014, but never put into service.

Stock# 52955002

Unused - Vapor Recovery Tower; 36" OD x 40'-0", Stainless Steel. Rated 75 psig at -20 to 450 F. ASME Section VIII, Division 1, 42 Bbl Capacity. Serial# 3156-2, National Board# 1384, built 2014, but never put into service.

Stock# 52955003

Unused - Vapor Recovery Tower; 36" OD x 40'-0", Stainless Steel. Rated 75 psig at -20 to 450 F. ASME Section VIII, Division 1, 42 Bbl Capacity. Serial# 3156-3, National Board# 1387, built 2014, but never put into service.

Stock# 10986016

Used-Palm Oil Refinery Plant. Rated 120 Tons per day. Winterizing Deodorizer. Can also produce soy, peanut, and canola oil. Includes (2) boosters, (2) condenser, (2) ejectors, (2) heaters. (4) Filters, (2) at infeed and (2) at discharge. (2) Flow meters with electronic transmission and (2) heat exchangers. (4) Tanks with pumps and motors. Totally reconditioned in 2014. Brought up to efficiency standards. Info and drawings available. With Corn Washing, Drying and Bagging Plant for Corn Flour. Rated 2.5 Tons per hour. Running 5 lbs bags at 30 BPM. Includes: Corn soaking vessel, approximate 36" diameter x 18 long screw. Steam injected. Corn washing separation. Pneumatic sir system. Sifter, holding bin, dust collector, hammermill, finished product bin. (1) Manual clamp bagger, approximate 15 bpm, 25 kilo/50 lbs bags. Elevator. Stainless steel screw conveyor, approximately 10" x 20 long. (2) Hoppers. (1) Form, fill, seal bagger machine, 1lbs bag at 60 per minute. (1) Speedy manual bag machine, 1lbs bags at 15 per minute. With Liquid and Solid Crystallizer Filtration Plant. Rated 200 TPD for solid, 120 TPD liquid. Includes: (2) Crown Iron Works crystallizers. (1) Andritz filter press, (34) 55" x 55" square plates. (1) Liquid cooler with screw compressor. (1) Cooling tower. (2) Compressors with water and oil separator. (2) Liquid flow meters. (2) Stainless steel heat exchangers. (1) Hopper for solids extraction. (12) Pumps with motors. (10) Butterfly valves. (5) Vertical Stainless-steel tanks. (6) Stainless steel finished product tanks, 91-ton capacity each, 16 diameter x 22. Yr. 2014. A 5% Buyers Premium based upon final sales price will be assessed to the purchaser.

Stock# 52980001

Used-Animal Protein Feed Line rated 3-5 tons per day and consists of the following components: UAS 350 hp hammermill Model 112X110D, UAS 150 hp hammermill, Wenger (UAS) stainless steel feeder conditioner, Anderson 12" expander, 350 hp with cutter and pelletizer head, Fulton Model TSCS60 steam boiler, Geelen counter flow Dryer-Cooler Type VD28X38J (3-deck stainless steel, equipped with Maxon burner), Karl Schnell 225mm emulsifier, stainless steel grinder, dust collectors, and a control panel. The plant was designed to process grains and animal byproducts to produce chicken feed protein. Silos are not included.

Stock# 52984001

Used-20mW Steam Generating Power Plant with building and supporting structures. The plant includes: (1) WEG 2625Kva 11,000-volt synchronous continuous duty alternator (built 2012) (1) Triveni 20 mW steam bleed condensing turbine with gearbox (built 2012). The 20,000kW power rated steam turbine has inlet steam pressure of 40 bar and steam temperature of 400 degree C and a turbine speed of 6,150RPM. 21,800kW powered gearbox has an input speed of 6150RPM and output speed of 1,500rpm. The plant includes ACC vacuum condensing equipment, a RO water plant capable of 5000 Ltrs per hour, a condensate polishing plant and includes all ancillaries . This unit was commissioned in 2015, saw little use and is offered for sale in it's mothballed condition with the turbine bared regularly. Also available for sale as a complete package with the plant or as a separate purchase is an unused Triveni 20mW steam bleed condensing turbine with gearbox.

Stock# 52953001

Used-Terex Model RT 230, Rough Terrain Crane. Rated capacity: 30 Ton @ 10'f working radius. Maximum boom length: 94'. Maximum tip height: 140' . 930.7 Hours. Yr. 2009.

Stock# 52651002

Used- SPX Flow Technology Spray Dryer, Type MS-400, Stainless Steel. Explosion duct, Controls and Single Pass. Rotary Atomizer. Serial# 57027, built 2021. Electrical requirements 480 Volt.

Stock# 52988001

Used-Faustel Pilot Scale Pressure Sensitive Adhesive Coater/ Dryer. Multiple coating heads with drying capabilities (20 ft long, 2 zones) and laminating capabilities. Used to make pressure sensitive tape products at narrow width. Cores Size I.D 3" to 6". Max Web Width: 14". Max Unwind O.D. 18", Max Rewind O.D. 24" Speed Range: 20 to 300 FPM. Materials: From mil films and up. Burner: 450 deg F. Burner size: 2-400,000 BTU each. Rated 1000 cfm. 2/3 roll reverse (Nip Fed). 2 or 3 Roll Pressure. 1 or 2 Roll Kiss.

Stock# 52287008

Unused - Frigoscandia Advantec Impingement Freezer with Model 1.5M-1250-2-R12 ADF Conveyor; Conveyor includes: 2x 625mm wide, Stainless Steel Conveyor Belt 28.4" Belt Length, 22.9" Active Impingement Plenum Length; M13 x 2.5 Wire Mesh, 7.28" maximum product clearance; Double Impingement Airflow; Twin Belt / Straight-Through Layout; Spray-galvanized motors with variable speed; Belt Drive Horsepower- 0.33HP; Evaporator and Fans include: 12 Row Deep Stainless Steel Tube/Aluminum Fin Evaporator; Stainless Steel Evaporator Stand; Refrigeration requirement of 30 tons of refrigeration (TR) at -40F evaporation temperature measured at the coil (incl. 10% Safety Factor); Ammonia refrigerant; Hot Gas and/or Water Defrost; Pipes for water defrost w/ valves; (3) Aluminum Centrifugal Fanwheels and Inlet Cones; Aluminum Fan Motors; 10 HP; Enclosure and Floors include: Fully Welded Stainless Steel Insulated Modular Floor; Water drainage, two drains per side for each module; Level 1 - Caulked Seam Insulated Enclosure with 4" thick Polyurethane walls; Inspection doors w/door heat; Fluorescent (or LED) lighting; Stainless Steel interior and exterior; Approximate Enclosure Dimensions: 25'-5 " X 11 '- 6" X 9'-8"; Approximate lnfeed/Outfeed elevation:37 "; Stainless Steel Adjustable Legs; 460VAC/3/60Hz, 24VDC Controls; NEMA 4X Stainless Steel Sloped Top Enclosure; PLC Controls with Touch Screen HMI Interface; Allen Bradley PLC; Belt Rinse System w/ stain less steel pipe and brass nozzles; Marine coating/surface treatment, i.e. 2-component epoxy top coat, for fan and/or belt drive motors; Air Defrost System (ADF) for Extended Runtimes; Adsorption Dryer, complete w/liquid and dust filter; Support frame w/wheels and drive mechanism; Air distributor complete w/ brass nozzles; ADF receiver (ASME approved) with ADF valves

Stock# 52989001

Used- ABL Apple Peeling/Coring Line; Includes: ABL Model PDS TT50 Automatic Apple Peeler and Corer with sectioning ends cutting system. Input working capacity of 500 kg/hr; Workable sizes: small - 60 to 70mm; medium - 70 to 85mm; large - 85 to 100mm; belt conveyor. Reported to be reconditioned.

Stock# 52984002

Unused - Triveni Turbine Bleed Condensing Steam Turbine, type Bleed Condensing Turbine. Power rated to 20000 KW. Inlet steam 40 bar (600 PSI) at 400 deg. C (752 deg F). Inlet steam flow 91.5 TPH. Exhaust flow 86.139 TPH. Turbine speed 6150 RPM, Agitator speed 1500 RPM. Incl. Teil-Mysore gearbox, type N3219C. 21000 Kw. Input/output speed 6150/1500 RPM. Lubrication oil system, type 1135 LPM. 21000-liter (5555 US-Gallon) tank capacity. MOP main lubrication gear pump, type ISO-VG-46. Capacity 1200 liters (317 US-gallon) per minute. Auxiliary skit, Steam condenser. Complete with sensors, piping, valves, and additional infrastructure. Order reference: C-2846. New year 2012.

Stock# 52984003

Used-Triveni Turbine Bleed Condensing Steam Turbine, type Bleed Condensing Turbine. Power rated to 20000 KW. Inlet steam 40 bar (600 PSI) at 400 deg. C (752 deg F). Inlet steam flow 91.5 TPH. Exhaust flow 86.139 TPH. Turbine speed 6150 RPM, Agitator speed 1500 RPM. Incl. Teil-Mysore gearbox, type N3219C. 21000 Kw. Input/output speed 6150/1500 RPM. Lubrication oil system, type 1135 LPM. 21000-liter (5555 US-Gallon) tank capacity. MOP main lubrication gear pump, type ISO-VG-46. Capacity 1200 liters (317 US-gallon) per minute. Auxiliary skit, Steam condenser. Complete with sensors, piping, valves, and additional infrastructure. New year 2012.

Stock# 52962001

Unused - Siemens Energy Power Block, Type SGT-800 6x1 Combined-Cycle Power Plant designed for 420MW. 60Hz. Currently stored in Siemens bonded warehouses in Sweden, Germany, Vietnam, and China. The power generation package was designed for operation in a warm humid climate. The package is a 6 x 1 combined cycle power plant with a nominal capacity of 438 MW. Below is a high-level equipment list: 6 x Siemens SGT-800-56 Single lift drive units with separate generator units, 6 x Bypass Stacks, 6 x Heat Recovery Steam Generators, 1 x Siemens SST-600 Steam Turbine. In addition, Siemens SGT-800 Single Lift Drive package is a skid mounted drive package with separate 3-point lift generator unit that rests on a separate foundation. All six SGT-800 units have bypass stacks allowing for maximum operational flexibility. Each SGT-800 unit operated in open cycle mode has a nominal capacity of 56 MW under STP conditions and approximately 50 MW at 30 C and 75% humidity. The combined cycle plant has a nominal (STP) efficiency of over 51% (6,650 Btu/kW HHV heat rate) and the SGT-800 units in simple cycle mode have a heat rate of 8,650 Btu/kW.

Stock# 52272002

Unused - Siemens Steam Turbine Compressor Generator Unit, STC GV (40-6). (1) 10 MW generator, (1) high speed Lufkin gear unit, (1) lube oil unit, (1) steam turbine main driver, SST-600 (NK50/45), (1) start-up spare parts.

Stock# 11252214

Used- Hamilton 200 Gallon Agitated Kettle, stainless steel construction with 3/4 jacket, rated for 120 PSI at 342 degrees F. Features top mounted full sweep agitator, currently less drive. Hinged lid top covers. Hemispherical bottom with 2-1/2" diameter center bottom outlet.

Stock# 52959001

Used- Cleveland TMKEL Twin Mixer Kettle, 60 Gallon x 2, Model TMKEL-60T, Stainless Steel. Capacity twin 60 gallon kettles. Approximate 29-1/2" diameter kettles. 2/3 Jacketed rated 50 psi at 33 to 298 degrees F. Electrically heated. Mixer bridge with Anchor style agitator with bottom scrapers. Offset bar type agitator. Manual tilt. Water Faucet. 2" Bottom outlets with valves. Temperature controller, agitator speed controller. Top covers with pouring lip. Mounted on frame. National board# 39717 & 39718, Serial # WT5391-95F-02. 3/60/208 Volt.

Stock# 52961002

Used-BioCold Environmental Walk-in Chamber Room, Walk-in dimensions are 8 'x 8' x 8'. Chamber qualification is for Pharma, fully functioning with an Omega controller.

Stock# 52977001

Used- Mitsubishi CO2 Laser, Model 3718 LVP, 4000 Watt. 72" wide x 144" long Cutting Exchange Tables Cutting Area. Rotary Axis for Tube cutting. Will cut .030" to 1" Mild Steel, .030" to 1/2" thick Stainless Steel. MSC Load/Unload System. Includes Accu Chiller, and Torrit exhaust system.

Stock# 52728002

Used-Pro Fusion Custom Welding Lathe; Model PFL-1216-37; made to be 36" center to center instead of the stock 16" with TSS-2 Sharpshooter tungsten sharpener set

Stock# 52985001

Used-3 Axis CNC Router from Sabe Automation; 4 HP/18,000 RPM Ekstrom SM/SMT Spindle Motor; 69" by 45" Table Size; 48" x 96" x 10" travel Z-axis. Mfg.2011. Woodworking, plastic fabrication, non-ferrous metal machining (aluminum, brass, copper, zinc) composite machining (graphite, phenolic, Kevlar, etc.).

Stock# 52287007

Used- GEA Midi Scan 10 Vacuum Chilled Tumbler/ 10,000 lbs Batch Capacity. Stainless steel. Tilt forward drum for discharge, Kook glycol chiller, Vacuum pumps. Unit is 7 years old and used several times for Demo.

Stock# 52949001

Used-Baby Hippo Hammer Mill. 6 Screen Sizes include: 2mm; 3mm; 6mm; 15mm; 20mm; 25mm. Driven by 5 HP motor. Has VFD and Air conveyor.

Stock# 52978001

Used- INDCO MX5-E Mixer, Approximately 5 HP Motor. 175rpm fixed speed. Pneumatic lift cyclinder will raise 48" for total height of 118". Saw tooth Blade. Used with 55 Gallon drum (Not included).

Stock# 52976001

Used- Sprout Waldron Ribbon Blender; Approximately 50 cuft working capacity. Stainless steel interior. Center bottom outlet. Dimensions: 10' Long X 6'4" Wide X 7' Deep, Chain drive with 30 HP.

Stock# 52970001

Used-20 CU.FT. Twin Shell "V" Blender with Intensifier Bar. Stainless Steel. Has leg extensions. Last used in Food Plant. Believed to be a Patterson Kelley (PK Blender). 8" discharge with butterfly valve (8.25" ID, 10.5" OD).

Stock# 72966003

Used- Bivans 54L Carton Former and Bottom Closer. Capable of speeds up to 60 cartons per minute. Has a carton size range: 1/2" - 8-7/8" (Length) x 3/8" - 7" (Width) x 1-1/8" - 14-1/16" (Depth). Set up for tuck sytle cartons. Lexan safety guarding, mounted on casters. 110V/1Ph/60Hz, 100 psi air. AP8792.

Stock# 72972010

Used- PackWest 48" Diameter Stainless Steel Unscrambling Table, Model #48 UNSCRAMBLER. Includes guide rails and arm that are secured to stainless steel rods and mounted above table. Table is set at 33-1/2" high. Includes drive mounted inside stainless steel housing under table. Includes vari-speed controller. Previously used in spice jar packaging line. Serial# RUNS-2639.

Stock# 72992001

Used-Langen B1-OL Automatic Horizontal Glue Cartoner. Capable of speeds up to 120 cartons per minute (depending on carton size and application). Has 12" centers for a carton size range: 3/4" - 10" (length) x 3/8" - 6" (Width) x 3-3/4" - 8-1/2" (depth). Has top squaring chain for extended width cartons (up to 6"). Nordson Pro Blue 7 hot melt glue system with PLS electrocam. Adjustable bucket infeed. Allen Bradley SLC 150 PLC, A/B powerflex 525 drive. Set up and retooling available upon receipt of samples. Approximately 2,000 lbs.

Stock# 72993001

Used- ProSeal GTR Tray Sealer With Gas Flush. The GTR is a MAP (Modified Atmosphere Packaging) rotary tray sealer with 4 die impressions on each side 100mm x 100mm tray size ideal for sauces, olives, hummus, etc. "GTR Semi-automatic, two-station, rotary-unit capable of up to 30 Atmospheric packs per minute with a 2-impression tool. It is fully portable with an automatic film-feed. Mfg. 2015.

Stock# 72994001

Used- Extreme Dual Axis Servo Driven Horizontal Side Sealer, Model SAI8DC. Wrapper is capable of speeds up to 120 parts per minute. Has a maximum seal range of: 18"W X 8"H X infinite Length. Allen Bradley controls. 3/60/240V.

Stock# 72995001

Used - Wenzhou Zhonguam Packaging Machinery Liquid Filling Line consisting of Model ZH-FF 12-Head filler and Pressure Sensitive Front/Back Labeler Model ZHTBS02. Filler is fully automatic, right to left operation, anti-corrosive, fills liquids with viscosities similar to water, features PLC controlled for accurate, automatic fills, touch screen interface, adjustable, automatic bottle indexing, 12 nozzles, PVC nozzle hoses, (2) 15 gallon capacity plastic storage tanks. Conveyor with plastic belt, low friction guide rails. Full wash down machine. Built 2020. Labeler: 10~120 Bottles/Min(depends on bottle size and label size), bottle size range, Width 40-90mm Height 50-300mm, Suitable Label Range: Length 23-100mm,Height 30-140mm. Filler was last used filling chemicals into 16 oz and 32 oz bottles.

Stock# 72998001

Used- Roberts Model IMFS-1500 Preformed Pouch Filler and Sealer. Capable of speeds up to 50 pouches per minute (depending on application, bag size and product fill). Bag size range: Width of 4" - 12" or 100mm - 305mm Height of 5" - 15" or 150mm - 380mm, gusset of x 1" - 5" or 0mm - 125mm (gusset). Control panel with Yaskawa Servo drives, Allen Bradley PLC controls with Allen Bradley Panelview plus 700 HMI. Includes Markem date Coder

Stock# 72999001

Used- PSG Lee Model RT-108-WD Wash Down Rotary Fill & Seal Premade Pouch Packager. Machine is capable of speeds from 20 - 30 pouches per minute (depending on application) subject to pouch and product variables. Pouch size range: 6" - 12" or 152mm - 305mm (Width) x 4.7" - 16.75" or 120mm - 425mm (Length) up to 13.8" or 350mm. Weight Range: up to 20 lb or 10 kg. Designed for pouches with gusset, stand-up bottom, and zipper seal. Has an 8-station turret for: #1 pouch pick-up; #2 Hot Stamp coding; #3 zipper open; #4 pouch bottom open with pouch present detection; #5 open pouch transfer to fill station with product settler; #7 heat seal; #8 seal, quench, and discharge. Allen Bradley Compactlogic PLC & Proface HMI.

Stock# 73001001

Used- Accutek (Labelette) Model APS-106 Automatic In-line Pressure Sensitive Wraparound Labeler. Capable of speeds from 20 - 175 containers per minute (depending on materials, application and machine configuration). Label size range: 0.5" - 22" (length) x 0.75" - 5.75" (height). Container size range: 7/8" - 6" (diameter). Stepper driven. Label Roll: 14" OD with a 3" core. Includes hot stamp date coder and 42" diameter rotary accumulation table. Equipped with 72" long x 6" wide delron conveyor with adjustable guide rails, spacer wheel. 9" High label peeler plate and 22" long x 9" high belt wrap station. Touch screen controller with readout and E-stop. Mounted on stainless steel base frame with casters.

Stock# 73002001

Used-Posimat Model F-23 Posipuck Bulk Bottle Unscrambler and Puck Placer. CE Certified. Capable of speeds up to 200 BPM. Container size range: 26mm - 50mm (diameter) x 70mm - 140mm (height). Siemens Simatic PLC controller, 2-tier plastic belt fill & rejected bottle conveyor, inclined cleated belt bottle feeder with hopper. Last used in plastic bottle puck operation.

Stock# 73003001

Used- IME Model 2101 8-Head Semi Automatic Inline Pressure Filler. Stainless Steel Construction.

Stock# 73006001

Used- Viking Model M400 Vertical Form Fill & Seal Bagger. Capable of speeds up to 100 ags per minute. Has a bag size range (with changeparts): 2.36" - 15.76" or 60mm - 400mm (width) x 2.36" - 19.6" or 60mm - 00mm (length). Haas film registration and belt pull downs.

Stock# 73007001

Used- Accraply Model 350B-S Series Top and Bottom Labeling System. Special purpose labeling system developed specifically to apply top and bottom panel labels to a wide variety of products. 120 products per minute depending on application. Heavy Gauge Stainless Steel Base Frame with Adjustable Leveling Feet and Casters; Adjustable variable speed dual side belt conveyor for greater product control; Centralized system control panel with CTC color touch-screen, product and label counters, and rate meter; Convenient, centralized pivoting operator interface controls with stack light; Drop-in label threading with quick release rewind reel core; Dual Side-Belt Product Transport with Adjustable Speed Control; (2) Photoelectric Product Sensors (Primary, Secondary); (4) ACCRAPLY Servo SP10 Applicators with (2) Mounts for Bottom Labeling; (2) Mounts for Top Labeling; (2) Rod-Style Apron Upgrades for Top Applicators; (2) VideoJet Dataflex 6530 Thermal Transfer Printer (Top Label Only); (4) Air Assisted Label Peeler Assemblies with (4) SSTL Peeler Plates (peelers actuate for label threading); (4) Label Applicator Convenience Package, Includes: Low Label Roll and Broken Label Web Detection; (1) Centralized System Control Panel with Stainless Steel NEMA; 12 HMI Enclosure; Color Touch Screen Operator Interface; 10” Allen Bradley PanelView Plus 1000 Rate Meter - (displays part per minute rate); Remote Jog Switch for Upstream Heads; (1) Main Electrical Enclosure (UL 508A Enclosure); Stainless Steel NEMA 12 Main Enclosure; NEMA 12 Fan Kit Water Tight Connections on Main Enclosure and Label Heads (as Applicable ); Allen Bradley CompactLogix PLC 1769-L33E Allen Bradley 525 VFD. Built 2018.

Stock# 73008001

Unused: ACASI Filling Line.

Stock# 52965001

Used-Weima WLK15/55 & NZ6S/30 Plastic Recycling Line with a capacity of 66-220 pounds/hour (30-100 Kgs/hour). Consisting of (1) Weima single roll shredder, type WLK15-55 V-Rotor. 14.3 inch (368 mm) dia. rotor 90 RPM driven by a 55 kw-380 volt/50 cycle/3 Ph motor. Incl. hopper and discharge, (1) Weima granulator, type NZ6S/30. 12inch (310 mm) dia x 31.2-inch (800 mm) st. side rotor. 10 rotor knives, 2 bed knives. 45HP/30 Kw-380volt/50cycle/3Ph belt motor incl. hopper and discharge. (1) Belt conveyer incl. metal detector, on legs, (1) Belt conveyer (connect to granulator) on legs. (1) SPS Double door control panel. Incl. additional infrastructure. New year 2005. Previously used in a plastic recycling application on waste 5 hours per week.

Stock# 52960001

Used-Leistriz 4.29" (110 mm) Single Screw Pelletizing Line consisting of: (1) Leistriz single screw extruder, type ESE110/30D. 30:1 L/D. Electrically heated, air cooled. Max screw speed 140 RPM via a HE-43-160 gearbox by a 150HP/100Kw motor. Incl. feed hopper and vacuum pump. New 1995. (1) Hydraulic screen changer, (1) Die head frame mounted on wheels, (1) Stainless steel water bath, (1) Gala Model 8.1 3F pelletizing/drying system, Stainless steel, incl. water system, (1) Operating panel, (1) Control panel. New 1995. Previous used on PE R&D application in a university lab.

Stock# 52346006

Used-Complete Wash Line. Including - Gala Model 3252B Spin away Dryer. Discharging into a 10HP Material Blower which discharges into a Primary Cyclone and a 20HP Material blower to finish 36"material cyclone. 51"W Hydraulic Box Dumper. 10" U-Trough incline Auger. Sink-Float Tank with agitation (48"Wx17'L). 7"Diameter incline trash auger. 12" Incline U-trough auger. Technofer Spin Dryer.

Stock# 42275053

Used-Gammameccanica 65 Compac Plastic Recycling Line for PE ,PP, PC, PS, ABS with a capacity of max 270 kgs/hr. (594 Lbs/hr.) consisting of: (1) Belt conveyer with metal detector, (1) Compactor, (1) Gammameccanica 65 mm single screw extruder, 35:1 L/D incl. degassing, mounted on a platform (1) Hydraulic Screen changer (1) Water ring pelletizer, (1) Drying centrifuge, (1) Vibro sifter. Incl. Siemens controls, ABB inverters and additional infrastructure. New 2018.

Stock# 51749002

Used- KEK Screw Press, Model KEK-P0101. 100 kg/hr Capacity, 220lb capacity. 7.5 kW Drive Motor, Approximately 960 kg.

Stock# 13140152

Used-Hamilton Tank, 10,000 Gallon Horizontal Carbon Steel Self-Contained Storage Tank. 96" diameter X 324" long straight side. Tank is inside a rectangular steel containment with welded rain shields. Top fittings: 24" manway and (4) 4" NPT openings. Containment has (2) 24" manways, one end has (2) 3" and opposite has a isolation box with 4" opening and valve. Tank is UL listed for above aground flammable storage. Mounted on (3) carbon steel I-beams. Box off the end adds 23" and 3" pipes off the opposite end adds 14" to the overall length. Includes a top platform.

Stock# 52951001

Used- Tolan Horizontal Tank, 5,800 Gallons, Stainless Steel. Approximate 78" diameter x 24' long, slight coned heads. Mounted on (8) carbon steel legs with support rings. Top manway, end side outlet.

Stock# 52951002

Used- Tolan Horizontal Tank, 5,800 Gallons, Stainless Steel. Approximate 78" diameter x 24' long, slight coned heads. Mounted on (8) carbon steel legs with support rings. Top manway, end side outlet.

Stock# 52951003

Used- Tolan Horizontal Tank, 5,800 Gallons, Stainless Steel. Approximate 78" diameter x 24' long, slight coned heads. Mounted on (8) carbon steel legs with support rings. Top manway, end side outlet.

Stock# 52951004

Used- Tolan Horizontal Tank, 5,800 Gallons, Stainless Steel. Approximate 78" diameter x 24' long, slight coned heads. Mounted on (8) carbon steel legs with support rings. Top manway, end side outlet.

Stock# 52951005

Used- Tolan Horizontal Tank, 5,800 Gallons, Stainless Steel. Approximate 78" diameter x 24' long, slight coned heads. Mounted on (8) carbon steel legs with support rings. Top manway, end side outlet.

Stock# 52951006

Used- Tolan Horizontal Tank, 5,800 Gallons, Stainless Steel. Approximate 78" diameter x 24' long, slight coned heads. Mounted on (8) carbon steel legs with support rings. Top manway, end side outlet.

Stock# 52951007

Used- Tolan Horizontal Tank, 5,800 Gallons, Stainless Steel. Approximate 78" diameter x 24' long, slight coned heads. Mounted on (8) carbon steel legs with support rings. Top manway, end side outlet.

Stock# 52951008

Used- Tolan Horizontal Tank, 5,800 Gallons, Stainless Steel. Approximate 78" diameter x 24' long, slight coned heads. Mounted on (8) carbon steel legs with support rings. Top manway, end side outlet.

Stock# 52951009

Used- Tolan Horizontal Tank, 5,800 Gallons, Stainless Steel. Approximate 78" diameter x 24' long, slight coned heads. Mounted on (8) carbon steel legs with support rings. Top manway, end side outlet.

Stock# 52951010

Used- Tolan Horizontal Tank, 5,800 Gallons, Stainless Steel. Approximate 78" diameter x 24' long, slight coned heads. Mounted on (8) carbon steel legs with support rings. Top manway, end side outlet.

Stock# 52987001

Used-Bakersfield Tank, 14,000 Gallon, Model #: 4588-2 F; 10 GA Carbon steel, 151" diameter( 173" with pipes protruding on side) x 196" High. Flat top and bottom. Last used for oil storage.

Stock# 52987002

Used-Bakersfield Tank, 14,000 Gallon, Model #: 4588-2 F; 10 GA Carbon steel, 151" diameter( 173" with pipes protruding on side) x 196" High. Flat top and bottom. Last used for oil storage.

Stock# 11059302

Used- Cornell Versator Model D-26 Deaerator/Defoamer. Stainless Steel contact parts.1000 to 3200 rpm speed range. 5-125GPM dependant on viscosity and adhesive properties. Driven by Explosion Proof 15 HP, 230/460 v, 1765 RPM Mounted on base with 7.5 HP Busch vacuum pump model LT0170.

Stock# 52963001

Unused - Culligan Reverse Osmosis System, Model IWS - 70 RO, permeate flowrate 70 gpm @ 77 F Peak permeate flowrate 46 gpm @ 55 F Design recovery 75% No. of Membranes 12, 8" Membrane array 2:1:1 3M Motor HP 20, Grundfos Culligan electronic control panel, Digital readout TDS of feed and product water, Digital readout of product and waste flow, Low pressure switch, auto restart, and visual and audible alarms High pressure system throttling valves Painted steel frame with pressure rated fiberglass membrane housings. 460/60/3. Mfg. in 2021, but never used.