Used Stainless Steel Shell & Tube Heat Exchangers

Stock# 50467039

Used- Ketema Shell & Tube Heat Exchanger, 3.2 Square Feet, Type MVHT-1-A-SS. (28) .375" diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. Carbon steel shell rated 150 psi at 400 degrees F. Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/2, built 1995.

Stock# 50467040

Used- Ketema Shell & Tube Heat Exchanger, 3.2 Square Feet, Type MVHT-1-A-SS. (28) .375" Diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. carbon steel shell rated 150 psi at 400 degrees F, Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/A1, built 1995.

Stock# 52862017

Used- Doyle and Roth Vertical Shell and Tube Condenser, Approximate 18 Square Feet. Carbon steel shell rated 150psi / FV external at -20 to 300 degrees F. (50) 3/4" diameter x 24" long 316L Stainless Steel tubes rated 15 psi / FV at -20 to 350 degrees F. Baffle spacing 3.5". Single pass. Side lug mounted. National Board# 20757, Serial# S1998.

Stock# 52862014

Used- Cataract Steel Industries Shell and Tube Heat Exchanger, Model SG-33006-SETT, Approximate 21.2 Square Feet. Carbon steel shell rated 60 psi at -20 to 300 degrees F. (27) 3/4" diameter x 48" long 316L Stainless steel tubes rated 100 psi at -20 to 300 degrees F. Openings: (2) 6", (2) 2", (2) 3/4". Side lug mounted. National Board# 4639, Serial# 33006, built 2013. No top or bottom heads, Flange cut on one side.

Stock# 52299003

Used- Allegheny Bradford Corp Sanitary Shell & Tube "U-Tube" Heat Exchanger, Approximate 32 Square Feet, 316L Stainless Steel, Horizontal. 4-Pass. (34) 316L Stainless steel 3/8" diameter "U" tubes rated 150 psi/ Full Vacuum at -20 to 350 degrees F. 304L Stainless steel shell rated 150 psi/ Full Vacuum at -20 to 350 degrees F. Openings: (2) 3" shell inlet/outlet, (2) 1" tube inlet/outlet, (2) 3/4" vent/drain. National Board # 3353, Serial # 16686-5-1.

Stock# 52299002

Used- Allegheny Bradford Corp Sanitary Shell & Tube "U-Tube" Heat Exchanger, Approximate 70 Square Feet, 316L Stainless Steel, Horizontal. 8-Pass. (60) 316L Stainless steel 3/8" diameter "U" tubes rated 150 psi/ Full Vacuum at -20 to 350 degrees F. 304L Stainless steel shell rated 150 psi/ Full Vacuum at -20 to 350 degrees F. Openings: (2) 2" shell inlet/outlet, (2) 1" tube inlet/outlet, (2) 3/4" vent/drain. National Board# 6283, Serial# 037383-1-1-1.

Stock# 43704015

Used- Perry Products Shell & Tube Heat Exchanger, 70 Square Feet, Model FTSX-6-70. 316 Stainless steel tubes rated 75 psi at -20 to 200 degrees F, carbon steel shell rated 75 psi at -20 to 300 degrees F. Stainless steel heads with (2) 1-1/2", shell openings 2". Mounted on saddles. National Board# 7279, serial# B-7271, built 2009.

Stock# 51637006

Used- Enerquip Shell & Tube Heat Exchanger, 304L Stainless Steel, Vertical. Approximate 89 square feet. 304L Stainless steel shell rated 150 psi at -20 to 375 degrees F. (85) 316L Stainless steel straight tube .625" OD (1/2" ID) x approximate 96" long x .035" thick, rated 150 psi at -20 to 375 degrees F. (2) Tubes have been plugged. Missing 304L Stainless steel heads. Side lug mounted. Serial# 5312, National Board# 3887, Built 2001.

Stock# 52551008

Used- Rubicon Industries Inc Shell & Tube Heat Exchanger, Horizontal. Approximately 102 square feet. Approximate 12-3/4" diameter x 72" long. Shell SA-53 rated 150 psi/-14.7 at -20 to 400 degrees F. (104) 304L Stainless steel straight tubes .625" OD, rated 200psi/-14.7 at -20 to 400 degrees F. Expansion joint. Saddle mounted. Serial# 4010-4. National Board# 2771. Built 2014.

Stock# 52052007

Used- Doyle & Roth Shell & Tube Heat Exchanger, Horizontal. Approximate 108 Square Feet. Carbon steel shell rated 270 psi at -20 to 150 degrees F. (55) 304 Stainless steel 3/4" diameter x 10' long straight tubes, rated 159 psi/FV at -20 to 300 degrees F. Openings: shell side (2) 1-1/2", tube side (2) 4", (1) 2". Saddle mounted. Serial# J-6750-10, National Board# 15761, Built 1992.

Stock# 52046002

Used- Industrial Process Equipment Corp Shell & Tube Heat Exchanger, Model 4ST14-72, 316 Stainless Steel. Approximate 129.6 square foot. 316 Stainless steel shell rated 50 psi/FV at -20 to 250 degrees F. (110) 316L Stainless steel 3/4" diameter x approximate 72" long tubes, rated 100 psi at -20 to 250 degrees F. 316L Stainless steel heads. Openings: shell side 6", 4", 2", tube side (2) 3". Saddle mounted. Serial# 1203-3949, National Board# 5117, Built 2004.

Stock# 51094040

Used- Mason Manufacturing 4 Pass U Tube Shell & Tube Heat Exchanger, Approximate 141 Square Feet, Horizontal. 316L Stainless steel shell rated 14.9 psi at -20 to 400 degrees F., (30) 3/4" diameter x 12' long 316L stainless steel tubes rated 150 psi at -20 to 160 degrees F. carbon steel head, 316L stainless steel tubesheet. Openings shell 3", 4", 6", openings head (2) 3". Mounted on saddles. Serial # 13-6203, National Board # 2082, built 2013.

Stock# 52052005

Used- Doyle & Roth Shell & Tube Heat Exchanger, Horizontal. Approximate 148.8 Square Feet. Carbon steel shell rated 150 psi/FV at -20 to 400 degrees F. (202) 304 Stainless steel 3/4" diameter x 45" long straight tubes, rated 150 psi / Full vacuum at -20 to 400 degrees F. Openings: shell side 4", 2", tube side (2) 8". Saddle mounted. Serial# S3214, National Board# 21928, Built 2018.

Stock# 51870014

Used- J.F.D Tube & Coil 8 Pass Shell & Tube Heat Exchanger, 151.6 Square Feet, Type NEN, Size 10-168, Horizontal. Carbon steel sheel rated 200 psi at -20 to 400 degrees F. (56) 3/4" Diameter x 14' long 316L stainless steel tubes rated 150 psi at -20 to 450 degrees F. 316L Stainless steel tubesheet and heads. Openings shell (2) 2", tubes (2) 2". Mounted on saddles. Serial# 15101, National Board# 2090, built 2015. Last used In Bio-Diesel.

Stock# 52671001

Used- Enerquip Shell & Tube Heat Exchanger, Horizontal, 304L Stainless Steel. Approximate 252 square feet. (92) 3/4" diameter x 167.88" Long 304L Stainless steel tubes rated 150 psi at -20 to 375 degrees F. Shell rated 150 psi at -20 to 375 degree F. Approximately 10" diameter x 168" long Shell. National board# 8186, Serial# 10423.

Stock# 52761001

Used- Tolan Machinery 4 Pass Shell and Tube Horizontal Heat Exchanger, Approximate 470 Square Feet. 316 Stainless Steel Shell rated 150 psi/FV at -20 to 350 Degrees F. (120) Stainless Steel 3/4" diameter x 240" long straight tubes rated 150 psi/FV at -20 to 350 degrees F. Openings shell: (2) 3" diameter, tubes: (2) 3" diameter. Mounted on a carbon steel frame. Serial# 7761, National Board# 2488.

Stock# 45402002

Unused- Graham Corporation Multi-Pass Shell & Tube Heat Exchanger, Approximate 1160 Square Feet, Horizontal. Carbon steel shell rated Full Vacuum and 20 psig at 250 degrees F. (370) 3/4" Diameter x 16 long 304 stainless steel tubes rated 400 psig at 250 degrees F. 304L Stainless steel tube sheet, carbon steel heads. Openings shell 18" vapor outlet, 4" vapor inlet, 2" condensate outlet, openings heads (2) 8". Mounted on (2) saddles. National Board # 30843, Serial # 01-46300-8.

Stock# 47768008

Used- Alco Heat Exchanger, Size 35.96, 1-32-52 H, Approximate 1,200 Square Foot. Approximate (778) 3/4" diameter x 8' long 316 Stainless steel tubes rated 75 psi @ 400 degrees F. Openings tube(head): (2) 12", shell: (2) 20".

Stock# 47205025

Unused- Steeltek "U" Tube Heat Exchanger, Approximate 1,355 Square Feet, Type BKU, Size 21/36-240, Horizontal. 304L Stainless steel shell rated 356 psi/Full Vacuum at -55 to 400 degrees F. (172) 3/4" Diameter x 20 long tubes rated 317 psi/Full Vacuum at -55 to 400 degrees F. 304L Stainless steel tubesheet and head. Openings shell: (2) 10", (2) 4", tubes: (2) 6". Saddle mounted. Serial# 08S-2413, National Board# 2016, built 2009.

Stock# 52049010

Installed but Unused- Southern Heat Exchanger Corp Shell & Tube Heat Exchanger, 1,445 Square Foot, Horizontal. Carbon steel shell rated 325 psi / full vacuum at -20 to 450 degrees F. (379) Duplex 2205 stainless steel 1" diameter x 15' long x 14 gauge thick straight tubes rated 267 psi / full vacuum at -20 to 450 degrees F. Openings: shell side 14", 6", (3) 2", tube side (2) 12", (2) 1". Tubesheet SA-516 clad with SA-240 Alloy 2205. Carbon steel heads. Saddle mounted. Serial# 10-0066, National Board# 13632, Built 2010.

Stock# 52052015

Used- Doyle & Roth Shell & Tube Heat Exchanger, 1,824 Square Feet. (929) 304 stainless steel .75" diameter x 10' long Tubes rated 86 psi/ FV at 400 degrees F. Carbon steel Shell rated 150 psi at 150 degrees F. National Board# 15755, Serial# J-6759-4, Built 1992.

Stock# 52049006

Installed but Unused-Southern Heat Exchanger Straight Tube Heat Exchanger, 2,583 Square Foot, Vertical. Carbon steel shell rated 242 psi / full vacuum at 450 degrees F. (841) Duplex 2507 Stainless steel 1-1/4" diameter x 10' x 14 gauge tubes rated 302 psi / full vacuum at -20 to 500 degrees F. Openings: shell side 12", 4", tube side 34", 20". Tubesheet SA-516 clad with SA-240 Alloy 2507. Carbon steel heads. Side lug mounted. Serial# 10-0004, National Board# 13641, Built 2010. Wt. 24,050#.

Stock# 52049005

Installed but Unused- Southern Shell & Tube Heat Exchanger, 2,868 Square Foot, Vertical. Carbon steel shell rated 234 psi / full vacuum at -20 to 450 degrees F. (1,053) Duplex 2507 stainless steel 1-1/4" diameter x 9' long x 14 gauge tubes rated 301 psi / full vacuum at -20 to 500 degrees F. Openings: shell side 14", 6", tube side 40", 26". Tubesheet SA-516 clad with SA-240 Alloy 2507. Carbon steel heads. Side lug mounted. Serial# 10-0008, National Board# 13642, Built 2010.

Stock# 48425001

Used- Southern Heat Exchanger Shell & Tube Heat Exchanger, Approximate 4,372 Square Feet, Horizontal. (514) 1-1/4" Diameter x approximate 307" long 430 stainless steel tubes rated 160 psi at 20 to 450 degrees F. Carbon steel shell rated 305 psi at 20 to 650/450 degrees F. Openings shell (2) 12", (1) 10", (1) 4", tubes (1) 22-1/2". Single head, 321 stainless steel. Saddle mounted. National Board # 12268, Serial # 03-407. Built 2005. No Head.

Stock# 31729

Unused- PX Engineering U Tube Heat Exchanger, 4611 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (668) 5/8'' Diameter x 252'' long 304 stainless steel tubes rated 75 psi at 212 degrees F. 304 Stainless steel tube sheet and heads. (2) 10" Shell nozzles, (2) 12" nozzles in head. Saddle mounted. Year 1980.

Stock# 48325001

Unused- Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger, 5700 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (1194) 3/4" Diameter x 11 long 304L stainless steel tubes rated 150 psi at 200 degrees F. 304L Stainless steel head and tubesheets. Openings for shell (2) 14", for tubes (2) 10". Mounted on saddles. Serial # 2692A. National Board # 3606. Built 2012.

Stock# 48325002

Unused- Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger, 5700 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (1194) 3/4" Diameter x 11' long 304L stainless steel tubes rated 150 psi at 200 degrees F. 304L Stainless steel head and tubesheets. Openings for shell (2) 14", for tubes (2) 10". Mounted on saddles. Serial # 2692B, National Board # 3607. Built 2012.

Stock# 46379023

Unused- 8 Pass Shell & Tube Heat Exchanger, 6,179 Square Feet, Horizontal. Carbon steel shell rated 425 psi/ full vacuum at -20 to 650 degrees F. (1,008) 1" Diameter x 24' long TP405 stainless steel tubes rated 500 psi/ full vacuum at -20 to 650 degrees F. Carbon steel heads. Openings: shell (2) 16", tubes (2) 10". Saddle mounted. Mfg. Daekyung Machinery & Engineering. Serial# DK2007-090B, National Board# 2418. Built 2008.

Stock# 48291048

Unused- Single Pass Shell & Tube Heat Exchanger, Approximate 8254 Square Feet, Tema Type AEL, Horizontal. Carbon steel shell rated 527psi/Full Vacuum at 230 degrees F. (1952) 3/4" diameter x 264" long 2205 Duplex stainless steel tubes rated 139psi/Full Vacuum at 230 degrees F, Duplex 2205 stainless steel heads. Openings shell (2) 6", openings for tubes 20", 24". Mfg: Ilsung Corporation. Serial# 14-HE-080, National Board# 2064, built 2014.

Stock# 48291049

Unused- Single Pass Shell & Tube Heat Exchanger, Approximate 8254 Square Feet, Tema Type AEL, Horizontal. Carbon steel shell rated 527psi/Full Vacuum at 230 degrees F. (1952) 3/4" diameter x 264" long 2205 Duplex stainless steel tubes rated 139psi/Full Vacuum at 230 degrees F, Duplex 2205 stainless steel heads. Openings shell (2) 6", openings for tubes 20", 24". Mfg: Ilsung Corporation. Serial# 14-HE-081, National Board# 2065, built 2014.

Stock# 42089001

Unused- Heat Transfer Systems Single Pass Shell and Tube Heat Exchanger, 10259 square feet, horizontal, type AEM 71-216. Carbon steel shell rated FV/150 psi at -20 to 200 deg F. (1785) 1-1/4'' diameter x 18 long 304 stainless steel tubes rated FV/150 psi at 20 to 300 deg F. 304 Stainless steel head and tube sheets. Openings: shell (2) 30, 54; openings for tubes (2) 6''. Saddle mounts. Serial #12928-7, National Board #18459, Built 2007.