Used Ribbon Blenders

Stock# 52248001

Used-Griffith 1500 lb Stainless Steel Dual Shaft Ribbon Blender, Model G-37.5/2. The blender sits on 4- 5,000 lb hermetically sealed load cells. Open top with stainless steel safety grates, Dual end bottom hydraulic discharge doors. Driven by (2) 7.5 HP, 3/60/230-460 volt motors. Last use to mix ground beef and pork for hotdog and sausage production.

Stock# 52715001

Unused - Tianheng Machinery Stainless Steel Ribbon Mixer; Model TH-SMJ-5000; 6300L Capacity; 30kW; Mixing time: 10-12 min/cycle; Dimensions: 2.57m x 0.90m x 1.75m; Approximately 680 kgs; Mfg. 2022.

Stock# 52945001

Used-Ribbon Blender, 35 cuft / 1,000 Liter, 316 Stainless steel interior, 304 Stainless steel Jacket. With pneumatic air control ball valve. Center discharge. Double Ribbon, Round post design.

Stock# 11059300

Used-American Process Systems Mobile Lab/Pilot Size Paddle Ribbon Blender Model: DRB-OP15. Trough is 10" x 6" x 6.5" Deep. Capacity is approx 0.15 Cubic Ft. Outlet has gate valve discharge. Has control panel with speed control and more. Last used in sanitary food plant.

Stock# 50537001

Used- A&J Mixing Specialist Forberg Fluidized Zone Twin Shaft Mixer, Model F120C, Carbon Steel. Approximate 4.2 cubic feet capacity. Minimum volume 48 liters, maximum volume 168 liter. Trough approximately 28-1/2" wide x 33" front to back x 24" deep. Driven by a 3 hp, 3/60/230/460 volt, 1740 rpm motor thru Renold gearbox. 30" diameter discharge ring. 8" Discharge height. 6" Diameter top inlet with slide gate valve. Air operated bombay discharge doors. Includes Foremost top mounted receiver hopper. Mounted on frame. Serial # 90118.

Stock# 50537003

Used- A&J Mixing Specialist Forberg Fluidized Zone Twin Shaft Mixer, Model F120C, Carbon Steel. Approximate 4.2 cubic feet capacity. Minimum volume 48 liters, maximum volume 168 liter. Trough approximately 28-1/2" wide x 33" front to back x 24" deep. Driven by a 3 hp, 3/60/230/460 volt, 1740 rpm motor thru Renold gearbox. 30" diameter discharge ring. 25" Discharge height. 6" Diameter top inlet with slide gate valve. Air operated bombay discharge doors. Includes Foremost top mounted receiver hopper. Serial # 91103.

Stock# 48091001

Used- American Process Twin Shaft Fluidized Zone Mixer, Model FZM-4S. 4.2 Cubic feet, 120 liters, Carbon Steel. Non-jacketed trough approximate 33" long x 29" wide x 24" deep. (2) 2" diameter shafts each with (14) 5-3/4" wide x 1/8" thick paddles welded to 1" posts. Driven by a 5 hp, 3/60/230/460 volt, 1680 rpm motor. (2) Breaker bars driven by a 1 hp, 3/60/230/460 volt, 1720 rpm motors. (2) approximate 26" x 6" bottom outlets. Has side lugs. Serial# 4388. Built 1995.

Stock# 11585071

Used-JH Day 5 Cubic Foot (approximately) Stainless Steel Double Ribbon Blender. Approximately 16" wide X 38" long X 19" deep. Center bottom discharge. Approximately 1.5 hp Motor and reducer. Top hinged cover. Mounted on legs.

Stock# 11585073

Used-Sohena10 Cubic Foot (approx.) Stainless Steel Ribbon Blender. Double ribbon. Stainless steel contacts. Carbon steel jacket. Approximately 20" wide X 60" long X 24" deep. Built by Howes. 4" Center bottom outlet with manual valve. Multi Section Hinged lid with counter weights. 26" clearance from bottom outlet to the floor.

Stock# 10715050

New- Paul O. Abbe, Model RB-10 Ribbon Blender. In -Stock .10 Cubic Foot working capacity. 11 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 22.1" wide x 38.6" long x 25" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 5 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 66 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 11.8" wide x 19.7" long. Approximate 3.2" wide x 9.9" flush air operated plug valve. Discharge housing is approximate 15.4" wide x 19.3" long. Approximately 35.5" discharge height. Approximate weight 1,320 pounds. Approximate overall dimensions: 36.4" wide x 76.4" long x 81.4" high. Controls are available upon request.

Stock# 48832001

Used- Paul O. Abbe Cross Flow Mixer / Twin Shaft Fluidizer, Model AF350, 304 Stainless Steel. 12.4 Cubic feet working capacity, maximum 17 cubic feet. Non-jacketed trough approximately 39-3/8" wide x 49-1/2" long x 35" deep. (2) Approximate 3" diameter shafts with (28) 8" wide x 7" long x 3/16" thick paddles welded with 1-1/4" diameter posts. Bolt on top cover with (2) hinged doors, (2) side access doors. (2) Bombay outlet door, air operated. Driven by a 7.5 hp, 3/60/230-460 volt, 1720 rpm motor with with 24.40:1 gearbox ratio. Mounted on a painted carbon steel frame. Serial# A48097.

Stock# 51647001

Used- Toronto Coppersmithing Single Spiral Ribbon Blender. Approximately 14 cubic foot capacity. 304 Stainless Steel Contact Areas. Non-jacketed trough approximately 48" Long x 24" Wide x 28" Deep. Single interrupted spiral ribbon with approximate 3" diameter shaft, 1-1/2" diameter welded post with 2" wide ribbons. Driven by a 10hp, 3/60/230/460 volt, 1760 rpm motor. Center bottom outlet approximately 6" diameter with manual butterfly valve. Includes top hinged cover with (2) safety grates. Mounted on a painted carbon steel frame. Serial# 4793.

Stock# 10715043

New- Paul O. Abbe, Model RB-15 Ribbon Blender. In -Stock .15 Cubic Foot working capacity. 18 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 24.4" wide x 48.9" long x 28.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 10 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 60 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 11.8" wide x 19.7" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 35.5" discharge height. Approximate weight 1,870 pounds. Approximate overall dimensions: 41.1" wide x 86.6" long x 86.6" high. Controls are available upon request.

Stock# 50047001

Used- Dinnissen Pegasus Twin Shaft Fluidized Paddle Mixer, 10 to 17 Cubic Feet Capacity, Type 305-500-7.5, 304 Stainless Steel. Non-jacketed chamber approximate 51-1/2" Front to back x 45-1/2" left to right x 27" deep. (2) 3" Diameter shafts each with 9" wide x 3/8" thick paddles, welded to 1-1/2" diameter posts. Driven by a 7.5 kW, 3/50/400/690 volt, 1460 rpm motor thru (2) shaft mounted reducers, ratio 24.6 to 1. Flat bolt on top cover with charge ports, dual Bombay style air operated discharge doors with a bolt on coned hopper, side access doors. Serial # 140293, built 2014, CE certified. Includes a BG Filtration dust collector, Type AASU0.6/2SW, SR, V2A, stainless steel. Serial # 14020231, built 2014. (3) Hartgen screw conveyors, (1) Servolift 250 kg lift with carriage, (3) carts, hopper and miscellaneous parts. Previous used in a coffee application. It was used one week a month for a period of 4 years and is in excellent condition. Manual and Prints are on file, request them from your Sales Rep and the System is available for inspection in Memphis, TN. Overall Dims can be provided at your request. Can be used for Coffee, Dairy, Food and Pharma, Chemicals and Minerals, Pet Food, Animal and Aqua Feed.

Stock# 11585072

Used-20 Cubic Foot (approximately) T316 Stainless Steel Ribbon Blender. Double ribbon, interrupted. Ribbon 1/4' wide x 1.5". 24" wide X 6' long X 27" deep. 6" Center bottom discharge outlet. 2 Piece Hinged cover. Dual cycle motor, 15 hp 3 phase 60 cycle 230/460v, 15 hp 50 cycle 200/400v 1455 rpm.

Stock# 52613001

Used-Amixon Mixing Technology Vertical Single Shaft Mixer, type AM 600, 316/316TI stainless steel on product contact parts. Total capacity 26.1 Cu ft (740 liter), working capacity 21.2 Cu ft (600 liter). Max batch size 1056 lbs (480 kgs). Non-jacketed chamber Polished Corn 120. Ribbon mixing device belt driven by an 18.5 KW-27.75 HP, 3/50/400-volt, 1475 rpm motor. Chopper driven by 9/11 Kw-13.5/16.5HP 3/50/400-volt motor. Incl. inspection door, control panel and additional infrastructure. Built 2007. Overall dimensions: 39" (1200 mm) x 6.10" (2150 mm) x 7.5" (2300 mm) high. Weight 1.6. tonnes empty. Previous used in a food application.

Stock# 51171002

Used- Gebr. Ruberg Mischtechnik KG Vertical Twin Spiral Batch Mixer, Type HM 600/656. Material of construction is 304 stainless steel (1.4301) on product contact parts. Total capacity 29.66 cubic foot (840 liter), working capacity is 21.18 cubic foot (600 liter). Inside rated for 1.5 PSI (0.1 bar). Twin shaft spiral mixing blades with a speed of 18-62 RPM by (2) drive motors. (2) Inspection doors with safety devices. Bottom product outlet. Frame mounted bottom part on 4 legs. No controls. New year 1998. CE-marked. Weight: 1.6 tonnes. Mixer (54.21") 1390 mm height, Support frame on legs 57.1" (1465 mm) height. Total height 111.34" 2855 mm. Previous used in a contract food application.

Stock# 49143001

Used- American Process Systems Forberg Fluidized Zone Mixer, Model FZM-35, 35 Cubic Feet Working Capacity, 304 Stainless Steel. Non-jacketed chamber approximate 58" long x 67" wide. (2) 4" Diameter shafts with (16) paddles per shaft, paddles 11-9/16" wide x 3/8" thick welded to 1-1/2" diameter posts. Driven by 30 hp, 3/60/208-230/460 volt, 1760 rpm motor with 30.05:1 gearbox ratio. (2) 20" x 20" side access doors, (2) 9" x 57" Bombay door style outlets. Includes stainless steel stand, Bag Dump Station. Serial# F1041. Last used for Cereal / Food Product. Great alternative for Ribbon and Paddle Mixer.

Stock# 10715046

New- Paul O. Abbe, Model RB-35 Ribbon Blender. In -Stock .35 Cubic Foot working capacity. 39 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 33.4" wide x 59.1" long x 37.4" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 25 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 42 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 19.7" wide x 31.5" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 24" discharge height. Approximate weight 2,860 pounds. Approximate overall dimensions: 52.7" wide x 107.5" long x 84.3" high. Controls are available upon request.

Stock# 52976001

Used- Sprout Waldron Ribbon Blender; Approximately 50 cuft working capacity. Stainless steel interior. Center bottom outlet. Dimensions: 10' Long X 6'4" Wide X 7' Deep, Chain drive with 30 HP.

Stock# 10715035

New- Paul O. Abbe Model RB-65 Ribbon Blender. In -Stock .65 Cubic Foot working capacity. 72 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 39.4" wide x 78.8" long x 44.1" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 30 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 36 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 23" discharge height. Approximate weight 5,060 pounds. Approximate overall dimensions: 60.6" wide x 131.4" long x 90.3" high. Controls are available upon request.

Stock# 10715060

New- Paul O. Abbe Model RB-100 Ribbon Blender. In -Stock .100 Cubic Foot working capacity. 108 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 44.9" wide x 93.8" long x 49.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 30 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 31 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 8" discharge height. Approximate weight 7,260 pounds. Approximate overall dimensions: 63.3" wide x 146.4" long x 80.8" high. Controls are available upon request.

Stock# 11059222

Used- 120 Cubic Foot S. Howes Stainless Steel Ribbon Blender. Driven by 40 hp, 208-230/460 volt motor into Gear reducer. Trough is 144" length x 48" deep x 45" wide. (2) 20 hp Bottom Side Entering Choppers/Lumpbreaker Drives with shafts and blades. 14" Center Bottom Discharge with Gemco Discharge valve with actuator. Last used in Food Plant (Bakery).

Stock# 11059297

Used- American Process Ribbon Blender, 120 Cu.Ft, Model DRB-120. 120 Cu.Ft. working capacity. Sanitary 304 Stainless Steel construction. Approx. 44" wide x 120" long x 52" deep trough, double ribbon. Has previsions for choppers. Driven by 40 HP SEW Euro motor drive into gear reducer. 10" diameter center bottom outlet on legs. Last used in sanitary food plant.

Stock# 52652001

Used- American Process Double Spiral Ribbon Blender, Model DRB120, 120 Cubic Feet, Stainless Steel. Non-jacketed trough approximate 44"W x 120"L x 54" Deep. 6" diameter shaft, approximately 40" diameter outter ribbon, 2" wide x 3/4" thick. 24" diameter inner ribbon, 3" wide x 1/2" thick. welded on 7" wide posts. Product feed hatch - 44" w x 48" L with gratings. (2) 44" W x 36" L welded wire safety screen, manual paddle gate, hoist operated hatch cover. Belt driven by 100hp, 3/60/460 volt, 1785rpm, gear drive @ 19.03 ratio. Approximate (2) 10" diameter center bottom outlet with pneumatic slide gate valve. Mounted on (4) legs. Serial# 5674.

Stock# 11059299

Unused - Blentech 125 Cu.Ft. (1000 gallon) Jacketed 316 Stainless Steel Ribbon Blender/Cooker. Trough is 10'L x 3'8"W x 4'7" D. Driven by 2 HP, 230/460 volt motor into gear reducer with 5.75 rpm output speed. Model# SH-125A. Jacket rated 90 PSI @ 300F. MDMT -20F at 90 PSIG. Top lid with actuator assist open. Has Spray Balls. Blender overall dimensions: 14'L x 6'W x 6'6"H. (2) 3" btm. outlets. Built in 2020.

Stock# 10715039

New- Paul O. Abbe Model RB-135 Ribbon Blender. In -Stock .135 Cubic Foot working capacity. 146 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 49.6" wide x 105.5" long x 53.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 40 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 33 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 8" discharge height. Approximate weight 7,920 pounds. Approximate overall dimensions: 64.8" wide x 158.3" long x 84.7" high. Controls are available upon request.

Stock# 10755148

Used-150 Cubic Foot Aaron Process Double Ribbon Blender. Food grade stainless steel construction. Legs and chain guard are also stainless steel. 10? air actuated center bottom outlet. Air cylinder actuated stainless steel lid. Ribbon is chain driven by a 40 HP 220/440-volt 1775 RPM gear head motor. previously used in powdered whey facility.

Stock# 10715040

New- Paul O. Abbe Model RB-165 Ribbon Blender. In -Stock .165 Cubic Foot working capacity. 180 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 53.6" wide x 110.3" long x 58.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 50 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 28 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 4" discharge height. Approximate weight 10,164 pounds. Approximate overall dimensions: 74" wide x 167" long x 85.5" high. Controls are available upon request.

Stock# 10715045

New- Paul O. Abbe Model RB-195 Ribbon Blender. In -Stock .195 Cubic Foot working capacity. 220 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 56.7" wide x 118.2" long x 62.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 60 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 29 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 4" discharge height. Approximate weight 11,660 pounds. Approximate overall dimensions: 76.4" wide x 183" long x 93.8" high. Controls are available upon request.

Stock# 11059264

Used-250 CU.FT. Marion Sanitary Stainless Steel Ribbon Blender. 14,000 lb. Reliance 100 HP Motor, 1785 RPM, 460 Volts, 3 Phase. Trough Approx. 144" L x 60" W x 66" Deep. Center Bottom Discharge. Overall Dims. of Blender Approx. 186" L x 67" W x 107" H, Mounted on Stainless Legs. Last used in Sanitary Food Plant.

Stock# 10715049

New- Paul O. Abbe Model RB-265 Ribbon Blender. In -Stock .265 Cubic Foot working capacity. 289 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 63" wide x 130" long x 67.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 26 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 14,960 pounds. Approximate overall dimensions: 81" wide x 206.5" long x 94.8" high.Controls are available upon request.

Stock# 49648064

Used- 304 Stainless Steel Double Spiral Ribbon Blender. Approximate 270 Cubic Foot working capacity. Non-Jacketed trough approximately 144" L x 60" W x 66" Deep. Open top, no cover. Approximate 10" diameter shaft, 1/2" thick x 3" wide outer ribbon, welded to 3-1/2" diameter posts, 7/16" thick x 3" wide inner ribbon welded to 3-1/2" diameter posts. Requires approximate 75hp motor. 20" long x 12" wide Center Bottom Discharge. Mounted on (4) stainless steel legs. 40" discharge height. Missing chain and motor.

Stock# 49648065

Used- 304 Stainless Steel Double Spiral Ribbon Blender. Approximate 270 Cubic Foot working capacity. Non-Jacketed trough approximately 144" L x 60" W x 66" Deep. Open top, no cover. Approximate 10" diameter shaft, 1/2" thick x 3" wide outer ribbon, welded to 3-1/2" diameter posts, 7/16" thick x 3" wide inner ribbon welded to 3-1/2" diameter posts. Requires approximate 75hp motor. 20" long x 12" wide Center Bottom Discharge. Mounted on (4) stainless steel legs. 40" discharge height. Missing motor.

Stock# 49648066

Used- 304 Stainless Steel Double Spiral Ribbon Blender. Approximate 270 Cubic Foot working capacity. Non-Jacketed trough approximately 144" L x 60" W x 66" Deep. Open top, no cover. Approximate 10" diameter shaft, 1/2" thick x 3" wide outer ribbon, welded to 3-1/2" diameter posts, 7/16" thick x 3" wide inner ribbon welded to 3-1/2" diameter posts. Driven by a 75hp 3/60/230/460 volt, 1770 rpm motor, through reducer. 20" long x 12" wide Center Bottom Discharge. Mounted on (4) stainless steel legs. 40" discharge height.

Stock# 49648071

Used- 316 Stainless Steel Double Spiral Ribbon Blender. Approximate 270 Cubic Foot working capacity. Non-Jacketed trough approximately 144" L x 60" W x 66" Deep. Open top, no cover. Approximate 10" diameter shaft, 1/2" thick x 3" wide outer ribbon, welded to 3-1/2" diameter posts, 7/16" thick x 3" wide inner ribbon welded to 3-1/2" diameter posts. Driven by a 75hp 3/60/230/460 volt, 1770rpm motor. Approximate 20" long x 12" wide center bottom discharge. Mounted on (4) stainless steel legs. 40" discharge height. Missing discharge cover, pneumatics, chain, gearbox, guarding.

Stock# 11252206

Used-300 Cubic Foot Double Ribbon Mixer, ribbons and trough are stainless steel construction. Features carbon steel jacket rated for minus 20 to 250 degrees Fahrenheit at atmospheric pressure. Manufactured by Young Industries. Internal dimensions of mixing trough measure 178" long x 44" wide x 66" deep. Driven by 30 HP motor through heavy duty gearbox. Features end bottom discharge with butterfly valve.

Stock# 10715051

New- Paul O. Abbe, Model RB-315 Ribbon Blender. In -Stock .315 Cubic Foot working capacity. 356 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 65.4" wide x 141.8" long x 73.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 20 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 5.5" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 19,580 pounds. Approximate overall dimensions: 87.8" wide x 218.4" long x 100.4" high.Controls are available upon request.

Stock# 10715053

New- Paul O. Abbe, Model RB-375 Ribbon Blender.In -Stock . 375 Cubic Foot working capacity. 441 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 67.7" wide x 157.5" long x 78.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 20 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 5.5" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 20,944 pounds. Approximate overall dimensions: 91.9" wide x 237.1" long x 104.7" high. Controls are available upon request.