Used Pasteurizers

Stock# 52944001

Used- Napasol Steam Pasteurization system is a batch system manufactured by Napasol in 2015. It utilizes steam heated hot air for preheating and a steam, pressure, and time pasteurization cycle in the autoclave chamber. The suggested configuration can be referred to in the provided drawing. The control panel and distribution cabinet consist of a Rittal enclosure with four doors, high voltage distribution for motor drives, low voltage distribution, and a computerized automation HMI system. The computerized process control software monitors the active process in all areas of the system, with the application displayed on the HMI display in the enclosure door. It offers various user login levels and supports both manual and automatic operation.The preheat stage chamber facilitates the hot air preheating of the product and has a capacity of 6 bins. It features an automatic vertical indexing temperature probe for process control and includes necessary hot air ducting, valves, and other components. Additionally, there is a steam heat exchanger and corresponding ducting and valves to conduct hot air into the preheat stage. The system also includes an infeed roller conveyor with both manual and automatic modes, equipped with light curtains used to count totes into the preheat stage. The conveyor is 20 feet long and 5 feet wide overall.The autoclave stage chamber, with a capacity of 6 bins, incorporates an automatic vertical indexing temperature probe for process control. It includes a steam valve and manifold, as well as a vacuum valve and piping for steam removal. Roller conveyor decks are utilized to transport the product between stages. The cooling stage comprises a hood, roller conveyor deck, cooling air ducting, distribution valving, cooling fan, and drive motor. A cooling stage HEPA filter and cooling air supply fan are also included.The system incorporates a WAMGroup Filter of Type FPHTU54VS199600, manufactured in 2014, and a fan of Type GF900/4 with RPM 1765, KW 30, and operating at 460 VAC, 3 Ph. A cold water storage tank manufactured by Midwest Tank CO with Serial #20929 and ID #A68354A, built in 2014, is also part of the system. The chiller is a York model #YLAA0155SE46XTX with S/N 11531G42788289, manufactured on July 24, 2014. It operates at 115 V control voltage and 460 V, 3 Ph power, using refrigerant 410A in a 4-stage system. The chiller has an operating weight of 7267 lbs. The system also includes cold water pumps and piping.

Stock# 11252171

Used-Goodnature FP XT 1500 Stainless Steel Tubular Pasteurizer HTST (High Temperature Short Time) System. Rated for 1,500 gallons per hour, 40 - 70 degrees F incoming temp, 195 degrees F pasteurization temp, max 9.2 lb per gallon product weight, 15-second hold time. Flash Pasteurizer includes 20' long, 316 stainless steel tube-in-tube heat exchanger and Goodnature Skid with 2" diameter coil, 40 gallon balance tank, (2) stainless steel centrifugal pumps, Waukesha Model 060-U3 positive displacement timing pump and Mokon heating system with electrically heated heat exchangers. System is also offered with Temptek Model MA-30 Air-Cooled Glycol Chiller package with glycol tank and Temptek Model TTKC-800-3P Pump Station. Previously used at major beverage processing facility. Includes stainless steel panel with chart recorder (less touch screen controller). Tube set includes Three-Zone set-up with 20' long tubes, 2-1/2" diameter outer tubes and 2" diameter inner tubes; Upper Zone includes (12) tubes, Middle Zone includes (30) tubes & Lower Zone includes (24) tubes. New in 2016

Stock# 52635001

Used-Good Nature Pasteurizer; 4 gallons per minute at pasteurization temperatures of 185 F 200F. This is a Hot Fill" only pasteurizer with no cooling heat exchanger capability. 5x9 Stainless Steel Skid Multitube Pasteurizer. PLC Controlled System: Pneumatics Valve System, Steam System, Product System with 50 Gallons SS Tank. Allen Bradley 12" Touch-Screen Monitor Model: PLC Controller SDR-480-24 Part-Low Temperature Graph Monitor Model: MRC5000 3 Hold Loop - 84" Long - 1-1/2" SS Piping System. 30"x12"x12" Heat Exchanger. Heat System: Spirax-Sarco Model#:70946-AP Bell & Gossett Hot Tank (2 HP Heat Pump). Condensate/Steam Recovery Horizontal tank - 84" long X 10" diameter, jacketed with pressure relive & pneumatic controlled valve. Pump#1: Product 2 HP Centrifugal Pump#2: Booster 3 HP Sanitary Uniblock Pump#3: Steam/Hot Water 2 HP Centrifugal; Pumps System capable to operate @ 240/480 Volts Air Feed: 80 110 PSI. Reported to be reconditioned.

Stock# 52768001

Used-Goodnature Pasteurizer; Model MFP-264; non-dairy HTST pasteurizer; Includes: M6M heat exchanger plates in the heating, regeneration and cooling sections. All fittings are 1.5" tri-clamp except for the heating section heat medium input and out put which are 3" pipe, adapters to 1-1/8" will be included as well as a heat pump; All heat exchanger and tri-clamp gaskets have been inspected and do not leak. The gaskets that touch product in the flow diversion valve have been replaced; designed to hold product at temperature for 16 seconds from the exit of the heating section to the temperature probe right before the flow diversion valve; Also includes: control box for managing the level of the balance tank; Does not have a heat or cooling source. Reported to be reconditioned.

Stock# 51879001

Used- Krones AquaAsept Sterile Water Ultra-High Temperature Processor (UHT) Model VarioAsept. Serial # KB72021 (2007). Capacity: 10,000 Liters / Hour; 30,000 1 / Hour Peak. 91% Heat Recovery CIP Module Included Rinses Containers with Sterile Water Supplies Hygienic Center with Sterile Water for Disinfection

Stock# 51879003

Used- Krones Sterile Water Ultra High Temperature (UHT) System. Model AquaAsept. Serial # KB70028 (2007). Prepares Sterile Water for Process Uses Capacity: 10,000 Liters / Hour; 30,000 1 / Hour Peak 91% Heat Recovery CIP Module Included Rinses Containers with Sterile Water Supplies Hygienic Center with Sterile Water for Disinfection.