Used Hammer Mills

Stock# 11453439

Used- Quadro Comil mounted in isolator, Model U10, stainless steel construction, missing beater and screen, direct coupled 20 hp, 230/460 volt xp motor with vfd controller mounted in xp panel, unit mounted in Carlisle Life Science isolator, stainless steel construction, single sided with (5) glove ports, approximately 60" long x 22" deep x 43" high, with 10" diameter end access door, on stand. Quadro Serial # U10-0112.

Stock# 44995055

Used- Entoleter Centrimil Impact Mill. No tag, missing drive. ** SALE SUBJECT TO SELLER'S APPROVAL **

Stock# 52524017

Used-Quadro Mill Model 197GPS Stainless Steel Sanitary; 1 HP Lesson Washdown Drive; Fincor Model 2330 Adjustable Speed Controller; Scale Up Factor 1: Wet 375Q (9.5MM) kg/hr 220; Dry 094R (2.4MM) kg/hr 360; Dry 040G (1.0MM) kg/hr 80; Motor HP (kW) 2 (1.5)

Stock# 52949001

Used-Baby Hippo Hammer Mill. 6 Screen Sizes include: 2mm; 3mm; 6mm; 15mm; 20mm; 25mm. Driven by 5 HP motor. Has VFD and Air conveyor.

Stock# 52283012

Used- Entoleter Centrimil Impact Mill, Model ECM. Carbon steel construction. Includes 16" diameter rotor with 3/8" diameter pins and 2-part rotating disc. Includes 8" X 3-1/2" top infeed and 6" diameter center bottom discharge. Driven by 5 HP, 220/440V, 3-phase, 60 Hz, 3600 RPM motor. Mounted on a frame. Catalog# 110778-20, Serial# 3931.

Stock# 52283011

Used- Entoleter Centrimil Impact Mill, Model FTM. Carbon steel construction. Includes 16" diameter rotor with 3/8" diameter pins and 2-part rotating disc. Includes 8" X 3-1/2" top infeed and 6" diameter center bottom discharge. Driven by 7.5 HP, 220/440V, 3-phase, 60 Hz ,3600 RPM motor. Mounted on a frame. Catalog# B-52900-63, Serial# 5807.

Stock# 52283014

Used- Sturtevant Model 3B Simpactor Mill, 16" Diameter. Carbon steel construction. Approximate capacity 3.5 tons per hour, depending on product. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial# 504.

Stock# 50647001

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

Stock# 50765001

Used- Fuji Paudal Atomizer Hammer Mill, Model EAW-5, 304 Stainless Steel. Approximate 10" diameter x 2-1/2" deep chamber, includes (12) hammers, 3/4" wide x 2" long x 1" deep. Driven by a Hitachi 8.7 kW (11.7 hp) main drive motor, 3/60/480 volt, 3470 rpm motor. Discharges through screen with approximately 1/16" diameter holes. Discharge housing 20-1/2" diameter x 4-3/4" deep. Includes top mounted screw feed, screw approximately 11" long x 1" diameter, in-feed 3-1/4" diameter, includes hopper. Driven by an approximately 3.7 kW (4.5 hp), 1720 rpm motor. Includes a control panel & toolbox of parts & spare screens. Serial # 19594. Built 1989.

Stock# 50823002

Used- Schutte-Buffalo 15 Series Wood Grinder, Model 15300, Carbon Steel. Rotor approximate 44" diameter x 72" long with approximate (6) rows of 23 hammers each row, 3" wide x 3/4" thick swinging hammers, tip speed 20,700. Top feed approximately 72" x 19", bottom discharge, bottom screen approximate 5040 square inch area, clam shell housing. Driven by a 500 HP, 3/60/460 volt, 1785 rpm motor. Mounted on an I beam frame. Serial # 17-12027A.

Stock# 50823014

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate (2) 48" diameter x 24" wide rotors. 2-3/4"w x 4"L x 5/16" thick swinging hammers, approx 7 rows of (14 hammers) 2 sections, 3/16" screen. 15"W x 60" Long Top feed with hopper, 60-1/2"L x 11"T bottom discharge. Driven by a 600 HP, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200 HP, 3/60/230/460 volt, 1785 rpm motor.

Stock# 50823042

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate (2) 48" diameter x 24" wide rotors. 2-3/4"w x 4"L x 5/16" thick swinging hammers, approx 7 rows of (14 hammers) 2 sections, 3/16" screen. 15"W x 60" Long Top feed with hopper, 60-1/2"L x 11"T bottom discharge. Driven by a 600 HP, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200 HP, 3/60/230/460 volt, 1785 rpm motor. Astec Serial # 16-086-299260-22-1.

Stock# 50823043

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate (2) 48" diameter x 24" wide rotors. 2-3/4" wide x 4" long x 5/16" thick swinging hammers, approximate 7 rows of (14 hammers) 2 sections, 3/16" screen. 15" wide x 60" long Top feed with hopper, 60-1/2" long x 11" tall bottom discharge. Driven by a 600 HP, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200 hp, 3/60/230/460 volt, 1785 rpm motor. Astec Serial # 16-086-299260-22-1.