Used Disperser Mixers

Stock# 52849001

Used- Morehouse Cowles Dissolver Disperser, Model ViscoMax-2J, Multi-Shaft, Wiper Blade and Hi-Speed Saw Tooth Blade. Serial# LA-616

Stock# 50556014

Used- Myers Model LB 775-2 Dispersion Mixer. 1.5 hp, with Stainless Steel shaft and blade, shaft measures 1" diameter x 13" high with 3-1/2" diameter dispersion blade. Driven by 1-1/2 hp,115/220V, 3450 rpm motor. Mounted on stand with 18-1/2" left-to-right opening x 20" high. Includes manual adjustments for raising/lowering height of mixing blade in can and raising/lowering entire mixing assembly. Serial #887. Previously used in lab at paint and lacquer processing facility.

Stock# 52283017

Used- Myers 2 HP Dispersion mixer, Model 775A-2. Includes stainless steel shaft and dispersion blade. Driven by 2 HP, 230/460 V, 3-phase, 60 Hz, 3,490 RPM motor through V-belt assembly. Stainless steel shaft measures 1" diameter X 16" high, with 4" diameter dispersion blade. Set up for jack manual with 5" high clearance. Mounted on floor stand. Myers serial# 530.

Stock# 52393005

Used- Schold Variable Hi-Speed Disperser, Model VHS 200. 304 Stainless Steel contact parts. Approximately 3-3/4" diameter disperser blade, with (8) blades. 1-1/2" diameter shaft. Driven by a 3hp, 3/60/230/460 volt, 1730rpm XP motor. 1260-6600 speed. 125lbs max pressure. Carbon steel base. Serial# S3361.

Stock# 52393006

Used- Schold Variable Low Speed Disperser, Model VLS 200. 304 Stainless Steel contact parts. 3-Blade agitator, 4" long x 3-1/4" wide x 1/2" thick. 1-1/2" diameter shaft. Driven by a 3hp, 3/60/230/460 volt, 1765rpm XP motor. 150-1325 Speed. 125lbs Max pressure. Carbon steel base. Serial# S4863.

Stock# 50556015

Used- K & H Manufacturing Post-Type Mixer. Shaft measures 1-1/2" diameter with 6" diameter housing. Housing includes (2) paddle blades with one blade measuring 18" long x 1-1/2" wide extending from bottom of housing. Mounted on frame with manual height adjustment. Driven by 5 hp, 220/440 V, 1200 rpm, 3/60Hz motor. Previously used at paint processing facility. Good condition.

Stock# 43205001

Used- Mooney Slow Speed Disperser. 1-1/2 Diameter x 48 long shaft with a 18 diameter bowtie blade. Driven by a 5hp, 3/60/230/460 volt, 1730 rpm motor. Manual speed control, air/oil lift. Pedestal mounted.

Stock# 52942001

Unused- Indco Heavy Duty Disperser, Model MX5-TV2. Approximate 2" diameter x 58" long 316 stainless steel shaft, (2) approximate 15" diameter three-blade axial flow turbines, approximate 5hp,3/60 motor, ABB model ACS250 drive, approximate output speed range 30-200 rpm, approximate 48" raise height, container holder. Include a plastic drum.

Stock# 52978001

Used- INDCO MX5-E Mixer, Approximately 5 HP Motor. 175rpm fixed speed. Pneumatic lift cyclinder will raise 48" for total height of 118". Saw tooth Blade. Used with 55 Gallon drum (Not included).

Stock# 52770004

Unused- IKA Works Ultra-Turrax UTC Disperser Mixer, Model UTC 80 KT. Capable of processing media with a visocity of up to 5000 mPas. Maximum batch size 40 Gallon. Approximate 1-1/2" diameter shaft x 15" long, 3" diameter mixing blade. Driven by a 5hp, 3/60/230/460 volt, 3550 rpm UL listed XP motor.

Stock# 50281001

Used- Morehouse Cowles Dual Shaft Dissolver, Model Visco-Max 2I-24. (1) Anchor sweep agitator, driven by a 5hp, 3/60/230/460 volt, 1730 rpm XP motor, (1) High speed shaft with (2) saw tooth blades, driven by a 7.5hp, 3/60/230/460 volt, 1740 rpm XP motor. Air/oil hydraulic lift with air tank, base mounted. Serial# LA-601, built 1994. Includes an approximate 50 gallon jacketed stainless steel mixing tank.

Stock# 51099003

Used- Twin Motion Vacuum Mixer, 65 Gallon, Stainless Steel. Approximate 65 gallon jacketed mixing kettle, 30" diameter x 18" straight side, vacuum cover. Anchor style agitator with sidewall scrappers, driven by 7.5 hp motor. Off set high speed disperser, driven by 10 hp, 3/60/575 volt, 1765 rpm motor. Dual post hydraulic lift with hydraulic pump with vacuum pump driven by 3 hp, 3/60/575 volt, 1760 rpm motor. Floor mounted. No manufactures tag.

Stock# 51099005

Used- Twin Motion Vacuum Mixer, 95 Gallon, Stainless Steel. Approximate dimple jacketed mixing kettle, 30" diameter x 29" straight side, jacketed 10" up straight side, vacuum cover. Anchor style agitator with sidewall scrappers. Flat Top Lift/Lower Mechanism, driven by 10 hp, hydraulic system. Off set high speed disperser, driven by 10 hp, 3/60/230/460 volt, 1725 rpm motor. Board .90 Kw vacuum pump. Floor mounted. No manufacturers tag.

Stock# 51732001

Used- Schold Slow Speed Disperser, Model VLS-400. 200 Gallon mixing capacity. Approximate 3-1/2" diameter x 61-1/4" long stainless steel shaft with anchor style mixer, provisions for side and bottom scrapers. Driven by a 15hp, 3/60/220/440 volt, 1800 rpm motor. Mixing speed 48 to 260 rpm. Yaskawa A1000 drive. Air over Oil lift. No Change Can with Mixer. Base mounted. Serial# 1735, built 1961.

Stock# 52770001

Used- IKA Works Ultra-Turrax UTC Disperser Mixer, Model UTC 150 KD. Capable of processing media with a visocity of up to 5000 mPas. Maximum batch size 450 Gallon. Approximate 6" diameter disperser on 1-1/2" diameter x 28" long shaft. Driven by a 15hp, 3/60/230/460 volt, 3530 rpm UL listed motor. Frame mounted on casters.

Stock# 51099004

Used- Myers Tri-Shaft Combination Disperser-Mixer-Emulsifier, Model V550/500EH-15-25, 375 Liter (100 Gallon), 304 Stainless Steel. Equipped with dual shafts: (1) 3 wing anchor style agitator with side and bottom scrappers, driven by a 15 hp, 3/60/230/460 volt, 1765 rpm XP variable speed motor. (1) High speed paddle blade, driven by a 25 hp, 3/60/230/460 volt, XP variable speed motor. Provisions for a 3rd Shaft, no mixing element, equipped with 15 hp, 3/60/230/460 XP variable speed motor. (1) Approximate 100 gallon jacketed 304 stainless steel tank, 30" diameter x 36" straight side, dished top, flat bottom, jacket rated 14 psi, internal vacuum rated. Dual post mounted with hydraulic lift pump. Serial # 977.

Stock# 52695001

Used-Myers Engineering Single Shaft Disperser, Model 800A-30. 2-1/4" diameter x 46" long 304 stainless steel shaft with a 14" diameter 304 stainless steel saw tooth blade. 360 Degree rotation. Air over oil lift with an approximate 48" rise, overall raised height approx 122''. Manually adjustable speed range. Driven by a 30 hp, 3/60/480 volt, 1760 rpm XP motor. Base mounted. Includes approx 450 gal carbon steel mixing can. Can measures 48" dia x 56" straight side. Distance of mixer blade to ground is 8".

Stock# 11059267

Used-IKA Works Model MHD2000/50 Continuous In Line High Shear Mixing-Homogenizing-Milling-Dispersing System for Powder/solids and Liquid (Inline Powder Inducting, Wetting and Dispersing). Sanitary construction. This Model is rated at 175 GPM or 40,000 L/Hr. with Solids of 25,000 Lbs./Hr.. 125 HP Motor. Solids Inlet 8"; Liquid Inlet 4"; Outlet is 6". Solids and liquids are instantaneously mixed and dispersed in one step, maintaining a dust free environment. The MHD accurately combines the solid and liquid, and disperses them into a homogeneous, final product. Inline powder wettening and dispersing machine for continuous operation. Last use was in Sanitary Food Plant.

Stock# 51099001

Used- 200 Gallon Twin Motion Kettle Mixer. Stainless Steel Construction. Approximately 39" diameter x 30" straight side, removable dish top, hemispherical bottom, rated 58.8 psi at 284 degrees F. Center top entering (4) wing anchor agitator with sidewall scrappers, driven by 7.5hp, 3/60/230/460 volt, 1720 rpm motor. Top entering off center high speed dispersion blade, driven by 15hp, 3/60/208-230/460 volt, 1760 rpm motor. Serial # 02892396A, National Board # 195. Built by BV Speciaal Roestvrijstall Industrie.

Stock# 51099002

Used- Stainless Steel Twin Motion Kettle Mixer, 200 Gallon, Stainless Steel Construction. Approximately 39" diameter x 30" straight side, removable dish top, hemispherical bottom, rated 58.8 psi at 284 degrees F. Center top entering (4) wing anchor agitator with sidewall scrappers, driven by 7.5 hp, 3/60/230/460 volt, 1720 rpm motor. Top entering off center high speed dispersion dual blade, driven by 15 hp, 3/60/208-230/460 volt, 1760 rpm motor. Serial # 02892396B. Built by BV Speciaal Roestvrijstall Industrie.